How to maintain the Farm Wheel Tractors suppliers?

The objects of Wholesale Farm Wheel Tractors are mud, water and crops. Faced with the harsh operating conditions of exposure to the sun and rain, the long-term infiltration of mud, water and dust has objectively damaged the technical status of machines and tools. Technical maintenance is an important link to eliminate these adverse effects, restore the technical status of machines and tools, delay wear, increase service life and improve economic efficiency.

1、 Daily technical maintenance

The daily technical maintenance is divided into pre shift, intra shift and post shift maintenance. The pre shift and intra shift maintenance focuses on checking lubrication and necessary adjustment, while the post shift maintenance focuses on ensuring the good technical condition of the machine to prepare for the work of the new day.

Main contents of pre shift maintenance; Check the quantity of oil and water in the oil tank and water tank, and replenish if insufficient. Add lubricating oil to the lubricating points shown on the nameplate of the machine, check the tension of each transmission belt and chain, and tighten them appropriately.

During the shift, maintenance is generally carried out for about 4 hours. During the noon break, check the key working parts, remove the weeds and weeds, pay attention to the heating of each bearing, and add lubricating oil to important lubricating points.

The post shift maintenance is to carry out a comprehensive maintenance at the end of a day's harvesting operation, with each working part continuously loaded for about 8 hours:

1. Clean the chaff, grass clothes, soil and other attachments on the working parts of China LY100 rice and wheat combine harvester. For example, the residual grass on the cutter, the grass wrapped on the cutter drive eccentric wheel shaft, the dust on the radiator, the residue on the screen surface, and the residual stalk, drive wheel, roller and the mud attached to the shaft in the gap between the two sides of the cylinder concave should be completely removed.

2. Check the fastening of all working parts, the normal position of all bearing positions, and tighten the loose parts.

3. The severely worn V-belt and chain link shall be replaced.

4. Carefully check the flexibility and accuracy of the control lever, and identify the brake and left and right brake status.

5. Check and confirm the oil level of the oil tank, the leakage of the pipeline and the sealing of the hydraulic lifting system.

6. Clean the protective screen and filter element of the air filter. If necessary, clean them. After they are dry, soak the engine oil and reinstall them.

7. Check the gearbox and fuel pump, add engine oil in time, dredge the vent hole of the fuel tank cover, and clean the fuel filter.

8. Fill lubricating oil according to the lubricating point.

60HP FARM WHEEL TRACTOR

1. Adopt transmission 8+2 shuttle for easier operation which caters to different needs.

2. Good sealing performance of axles ensures it to work in deep mud field.

3. Adopt draft control for working smoothly.

4. Use double steering cylinders on front axle for reducing turning radius.

5.Air brake is optional for road transport.

6.High quality bearings are used for prolonging the work life.